Thin sheet screw with fine thread 6x25 bimetal
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | TSSH16AB5006000253 |
| EAN code | 5410439162067 |
| Functional name | Thin sheet screw fine thread |
| Packing type | Window box |
| Packaging quantity | 200 |
| Brand name | Pgb-fasteners |
| Material | Bi-metal inox A2 |
| Surface | Zinc flake coating |
| Thread shape | Full thread |
| Thread design | Self-tapping thread |
| PLU number | 53580 |
| d | Diameter | 6.0 |
| l | Length | 25.0 |
| sw | Width across flats | 8 |
| dk | Head diameter | 11,0 |
| Drill capacity | 1x1,5 / 2x1,0 | |
| p | Pitch | 1.2 |
| Installation environment | C1 - Dry indoor climate | |
| Type of point | Standard tip |
Advantages
| No pre-drilling required (max drilling capacity tI + tII: 1,0mm + 1,0 mm) |
| Less splinters during installation |
| Strong and secure connection due to the tension of the thread forming |
Applications
| For fastening brackets and components for photovoltaic installations to thin-walled metal profiles |
| For fixing steel profiles to steel substructures. Maximum drilling capacity depends on screw length and diameter. |
| PGB TSSH16 screws are thin sheet screws made of stainless steel A2 which are used to fasten steel and aluminum sheet profiles, especially for the fixing of the roof rails for photovoltaic installations. Thanks to the special bi-metal point tip, predrilling is not needed and drilling chips are reduced drastically. By the compression action of the thread, material is not removed but pushed down, which results in a safe and secure fixing. The pre-assembled sealing washer consists of a stainless steel shell with vulcanized seal in EPDM. |